The drive system for version 2

After my issues with working on the "hamster drive" system that currently isn't working, I decided for version 2 to move back to the Axle Drive system.

Joe's Drive System for rolling droids

Looked to be a low cost solid solution... I reached out to him to see if I could begin beta testing the drive system.

Printing the Parts

This was a long process, luckily I had a little help from the 3 working printers I have built over the past year :)

Many pieces took well over 10+ hours each
I boxed them all up and began work on the Cary sphere (frame) pieces.